| Powersupport H0973LL/A iPad Anti-Glare Film |  | Brand: Powersupport
Buy New: $24.95
as of 9/5/2010 12:48 MST details
New (3) from $24.95
Seller: myGearStore
Rating:  24 reviews
Media: Electronics
Shipping Weight (lbs): 0.4
Dimensions (in): 11 x 8.3 x 0.2
MPN: PS-ANTIGLAR-IPAD
Model: PS-ANTIGLAR-IPAD
UPC: 854616005245
EAN: 0854616005245
ASIN: B003KG9UK2
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Set includes an anti-glare screen film | | • | Protects your precious LCD screen from scratches, dust, and dirt | | • | Reduces visual impact of fingerprints and glare | | • | Advanced silicone static-cling adhesive technology leaves no residue if removed | | • | Film will not interfere with touch screen responsiveness |
|
| Similar Items:
| |
| Editorial Reviews:
Product Description
With the amazing capabilities of the iPad in your hands, why let the negative impacts of glare and fingerprints get in the way? Power Support's anti-glare film is a custom-fit film that will reduce the visual impacts of glare and finger printing while providing scratch protection. Equipped with an advanced static-cling adhesive, installation is easier than ever and will not leave a residue when removed.
Features
|
| Customer Reviews:
Showing reviews 1-5 of 24
 Does what it says September 4, 2010
J. Hicks (Queensbury NY, United States)
First, I agree that there should be 2 films in the box.
Second, I read tips on application, and watched the video online.
Third, I cleaned my screen with iKleen, then compressed air, and pretty much just went for it. While the film is slightly off alignment, my case keeps this minor glitch out of site, and there are no bubbles or dust thingies.
It looks nice, and it does what it says. Glare is remarkably cut, and even in the sun, it's easier to see.
But you know what?
I kind of miss the glossy screen. Things aren't as sharp. Though fingerprints don't show up as easily, it's a little harder to wipe clean due to the matte finish. And I do think that some games that require digital precision (I'm looking at you Chopper 2) suffer a bit. But that isn't the fault of the Anti-glare film. I just need to decide if that is a worthwhile trade-off.
So do your research with these things, and watch the video on applying the film. If you are unsure, I would go with a product that gives you two films instead of one.
I would be curious if anyone has removed their film to regain the benefits of their glare-ful screen.
 Worse Than Worthless September 3, 2010
B. Smith (Canada)
I'm skeptical this is a genuine product from Power Support, but even if it is - beware. The screen on the iPad is much larger than an iPhone/iPod and films are dramatically harder to install. It would have been extremely difficult even if the film I received from PS didn't have a large amount of dust trapped between the film and backing. Even the tiniest particle of dust creates a large air bubble that is almost impossible to remove - not that PS gives you anything in the package that would allow you to remove trapped dust. If everything doesn't go perfectly on the first try that $25 film is going straight into the trash.
 Easy to install and looks great! September 2, 2010
Paul Schumacher (Longmont, CO USA)
This product was fairly easy to install. I needed to wipe down the screen and brush off excess lint a few times just to get it right. I then applied the film just as they showed. It took about five minutes to 'push out' all the bubbles that formed, but the entire process was actually quite simple. I have one remaining bubble that formed near the edge of the screen, but to be honest, it's so small you don't even notice it. I love this anti-glare film! I think it looks much better now than without the film. Glare is reduced considerably, and the screen no longer acts as a mirror.
 hard to install August 30, 2010
C. Burton
I put 2 of these on my device.
I watched the installation instruction video and that was a huge help. I'd have never thought to do it that way and it makes for a much better end result.
The first was a slightly damaged to start with; it had a crease from the way it was handled during shipping.
I think I got the install pretty good with that one; it's hard to tell if the 3 air bubbles in it were the fault of the film being slightly damaged from shipping or if I had some dust under there.
I sent that one back b/c of the damage.
My 2nd install I did at home instead of at work and that was a big mistake. I had no idea how much dust floated over the stove in the kitchen! I've now got numerous air bubbles, one of which is huge and in a horrible place.
But if you can get it on, it's really great. Fingerprints just don't show up. I wipe it down maybe once a week b/c of build up, but even then it's not like you can make out individual smudges; it's more like wiping a really subtle layer of fog off a window. And it does a great job of reducing glare too.
Good protector - anti-glare helps August 27, 2010
JDB
If you follow the instructions and use tape to remove the dust motes that always manage to get under the film as you apply it, the install goes well.
Compared to another product I tried (the "3 Pack of Premium Crystal Clear Screen Protectors for Apple iPad") this one is a gem. The other product went on horribly - bubbles no matter what I did even after an hour of work. This protector went on within 20 minutes and looks good.
This film also works well to keep down the fingerprint marks. While it doesn't get rid of the glare, it is much easier to use the device with the film on.
Showing reviews 1-5 of 24
|
|
|
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED ‘AS IS’ AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Disclaimer | Privacy Policy
Powered by Bytewise
| |
